江阴如一科技发展有限公司

XE-300型硅钢片剪板机（硅钢片剪片机）
    江阴如一科技发展有限公司生产300型硅钢片剪板机是针对材料宽度小于300mm的硅钢片材料进行冲孔、剪切加工，适用于对变压器铁心、电抗器铁芯、电焊机铁芯等精确加工，剪切冲孔毛刺小于0.02mm,尺寸精度小于0.05mm，铁芯横剪线产品一致性好，不会产生高低片等问题，尤其在加工取向硅钢方面更是得心应手，能够快速剪切有取向硅钢，产生的应力小，对剪切刃口磨损小，模具研磨间隔时间长，有效地提高加工效率以及加工精度，提高产量和降低生产成本。
    针对材料不同长度的特点利用程序自动调节，只需要将需要的长度输入就可以获得准确的尺寸，同时也可以对因送料辊精确度的误差而进行补偿，以达到最佳效果。
    本设备采用台湾台达和东元的伺服电机以及PLC，全中文触摸屏独立的控制柜，能够有效的避免因设备振动给电器带来的各种影响。

300 CNC Traverse Cutting Devices are used for punching and cutting of the 300mm silicon steel sheets, applicable to the precision processing of the transformer cores, reactor cores and electric welder cores with the punch/cutting burrs smaller than 0.02mm and the size precision controlled between plus and minus 0.05mm. Iron core products enjoy good conformity without chip level problems. It is especially the case with the silicon steel processing, where the device can rapidly cut the orientated silicon steel with small stress, little abrasion to the cutting blade and long sharpening intervals for the mold. It can promote the processing efficiency and precision, raise the output and reduce the productive costs.
Automatic adjustment will be made by the programs according to different lengths of the materials. Input of your desired length will give you the accurate size. At the same time, compensation can be made up for errors of the precision of feed rolls as to achieve the best results.
This device uses the servo electric motors and PLC of Taida and Dongyuan of Taiwan and separate control by the full Chinese touch screen. It can effectively avoid various affections upon the electric equipment due to vibration.