300型铁芯横剪线

300型矽钢片横剪线（硅钢片横剪线）
    江阴如一科技发展有限公司生产的矽钢片数控横剪线，采用台湾台达和东元的伺服电机以及PLC,以数控全电动的方式剪切加工矽钢片。该设备一经使用便获得用户好评，在加工精度上大大的提高了铁芯横剪线行业标准，模具采用进口钨钢作为刃口，冲针采用全钨钢磨制有效地将剪切冲孔的加工次数提高数倍，在剪切无取向矽钢片时能够达到500万剪切次才需要研磨刃口，提高产能节约平时经常更换模具的时间，而且能够节约因模具损耗而产生的费用。将模具的使用寿命利用到最大化。
    针对硅钢片材料加工铁芯要求不同长度的特点利用程序自动调节，只要将需要的长度输入就可以获得准确的尺寸，同时也可以对因送料辊精确度的误差而进行补偿，以达到最佳效果。

300 Iron Core CNC Traverse Cutting Devices use the servo electric motors and PLC of Taida and Dongyuan of Taiwan, and cut and process the silicon steel sheet by fully-electric numerical control. When the device was first put into operation, it won broad accolade from the users. It has significantly promoted the industrial standard for the transverse cutting line of iron cores. The imported tungsten steel is used on the blade of the machining tool, and the punching needles are fully made of tungsten steel, effectively promoting the number of cutting and punching for times. When cutting the silicon steel sheet without orientation, it will be 5 million times cutting before the blade needs sharpening. It can save both the time for frequent replacement of the machining tools and the expenses wasted on the frequently replaced blades.  It has maximized the service life of the machining tools.
Automatic adjustment will be made by the programs according to different requirements and lengths of the silicon steel materials. Input of your desired length will give you the accurate size. At the same time, compensation can be made up for errors of the precision of feed rolls as to achieve the best results.