变压器铁芯数控横剪线

变压器铁芯数控横剪线是将硅钢片卷料进行横向剪切，目前可根据客户需要定制剪切最大宽度可达600mm，剪切模具材质采用日本进口硬质合金制造。适用于变压器、电抗器、电焊机、电器、等行业硅钢片卷料和低碳钢薄板横向剪切，已在川电、昆山特变、大宏机电、永展机电、德顺互感器、飞龙铁芯、威盛工业等上百家企业广泛使用。该系列产品在全国同行业中产销量占首位。


1.本横剪线可完成叠片式全直接缝铁芯片型的自动生产。
2.裁剪动力：采用进口伺服控制技术，速度快，噪音小，寿命长。
3.送料动力：采用交流同步伺服电动机，具有响应快，定位精度高，低噪音，制动热埙小，寿命长等特点。
4.轨道定位：采用丝杠直线导轨中心定位，刻度盘调节定位快速，准确，方便。
5.运动控制：采用先进的PLC控制器，即大量减少了接线又提高了系统的可靠性，稳定性与实时性，并可进行远程控制与故障诊断，可最大限度地缩短维护时间与费用。
6.模具：采用进口合金钢制造的模具，具有剪切毛刺小、模具寿命长、维护次数少等特点，模具制造工艺完全按照高速冲模具加工，维护、拆装、研磨尤其方便，减少劳动强度。
7.寿命保证：本设备标准件（直线导轨，滚珠丝杠，各种轴承）均为名优配件，基础件加工装配精度高，最大限度延长设备使用寿命。模具一次调试完成可加工500万冲次。
8.本横剪线是机光电一体的高科技产品，代表了国内硅钢片铁芯横剪线的较高制造水平。能够较好地替代进口产品，售价约为进口产品的三分之一，能够较好地为用户节省大量外购资金。

1.The device can complete the automatic production of the laminated fully-straight seam iron core sheets.
2.Cutting Power: uses the imported servo-control technology, fast in speed, low in noise but long in service life. 
3.Feed Power: uses the AC servomotor, fast in response, high in precision, low in noise, low in braking heat loss but long in service life.
4.Rail Positioning: uses the lead screw linear guide center positioning, dial scale regulation and positioning is fast, accurate and convenient.
5.Movement Control: uses the advanced PLC controller, namely: greatly save the time for wiring and improve the system stability and real-time response. It is compatible to the remote control and fault diagnosis, minimizing the maintenance time and costs.
6.Machining Tools: are made of imported alloy steel, with small-size burrs, long service life and less maintenance times. In terms of manufacture process, the machine tools are completely processed by the requirements of high-speed punch molds, convenient for maintenance, disassembly and assembly, and sharpening, reducing the labor intensity.
7.Warranty for Service Life: the standard components of the device (straight line guide rail, ball lead screws and various shaft bearings) are famous branded accessories, the basic parts are processed and assembled in high precision, as maximizes the service life of the device. Upon completion of commissioning, the machining tool can be used for 5 million punching times.
8.The device is a mechanic photoelectric hi-tech product, representing the high standard of domestic silicon steel sheet Traverse Cutting Devices. It can better replace the imported products with a price as high as only one third of that of the imported products, saving much purchase costs for the users. 

●主要型号和技术参数

联系方式：17701527279陈经理